Denso RC5 Spécifications télécharger pdf (Page 3)

Preface

Thank you for purchasing optional devices designed for DENSO robots.

This manual covers the specifications, installation, and use of optional devices to be configured in the

-D/-E series robot system together with the RC5 controller.

Before use, read this manual carefully to safely get the maximum benefit from your robot and options in

your assembling operations.

Options covered by this manual

Optional devices designed for robot systems configured with RC5 controller

Important

To ensure operator safety, be sure to read the precautions and instructions in "SAFETY

PRECAUTIONS."

To the customer who purchased an extension board

as an additional component

If you purchase an extension board requiring the system to enable the extension function with a

password, check the password label on the cover of this manual. The password is prepared in relation

to the serial number assigned to your robot controller. By using the password, you need to make the

system enable the extension function according to the procedure below.

NOTE: If your extension board is installed to any robot controller other than the one whose serial

number you informed us of at the time of purchase, the extension function cannot be enabled.

NOTE: If you purchase a robot controller with a built-in extension board, no enabling operation is

required since the robot controller is set up with the extension function enabled.

(1) Check that the serial number printed on the password label on the cover of this manual is identical

with that of your robot controller.

(2) Remove the password label from this manual and attach it to the OTHER MODIFICATIONS area of

the SETPRM LIST on your robot controller.

(3) Enable the extension function of the extension board according to the instructions given on the

following pages.

1 2 3 4 5 6 7 8 ... 137 138

Pas de commentaire

Denso RC5 Spécifications Page 3