Denso BHT-7500S Manuel d'utilisateur télécharger pdf (Page 80)

[4.5] Setting the communications environments

After the BHT is initialized, the interface port and communications parameters are set

as listed in the default table below. Do not access them unless necessary.

Listed below are the default communications parameters for the direct-connect inter-

face.

Interface port

Communications protocol

Communications parameters

for the optical interface port

TRANSMIT SPEED 9600 bps

PROTOCOL

(Protocol options)

Optical (Optical interface port)

BHT-protocol

Defaults

SERIAL No.: ON (Adds serial numbers

to data blocks.)

H. PARITY: ON (Adds a horizontal

parity.)

LINKUP TIME: 30 seconds

FIELD SPACE: Ignore

Defaults

Communications parameters for

the direct-connect interface port

TRANSMIT SPEED 19200 bps

PARITY BIT None

(Vertical parity)

DATA BIT 8 bits

(Character length)

STOP BIT 1 bit